Welcome to Shandong EAAK Machinery Co., Ltd

+86-531-82020399 info@eaaklaser.com
Laser cutting machine,laser cutter,laser engraving machine,fiber laser metal cutting, > News > Industry Dynamics >

Can rusted iron plates be cut directly with a laser cutter?

Post time:2019-07-11    By:EAAK    Clicks:
Everyone knows that the laser cutting machine is an artifact that cuts iron and mud, but the laser of the laser cutting machine is powerless to the surface of the rust. Because the laser itself cannot be a light source, heat is generated only after absorption through the surface of the sheet metal workpiece. For unrusted materials and rusted materials, the laser absorption is very different and the cutting effect is different.
Taking a rusted sheet of 5 mm or less as an example, the cutting condition of the sheet which is cut uniformly and uniformly rusted is better than that of the uneven rusted sheet. Since the overall uniform rusted plate absorbs the laser light evenly, good cutting can be performed. For the processing of materials with uneven rust on the surface, the surface condition of the material should be uniform before cutting. Of course, if conditions permit, it is recommended to use a sander for rust removal.
For thicker rusted plates, if the laser cutting machine is used to cut the rusted slab, it is easy to cause the cutting to be impervious, the cutting quality is not good, and even the slag splashing may occur, which may result in Damage protects the lens, even focusing the lens, causing the ceramic body to burst. Therefore, if you cut thick rusted materials, you must first remove the rust and then cut.

Recommended Reading

How to protect laser power source in summer?

How to protect laser power source in summer?...

Why the price of laser cutting machine different but similar configuration?

Someone want to buy laser cutting machines from China and found that there is a strange phenomenon--two sets of laser mac...

The cause and solution of burrs on the edge of laser cutting metal.

The cause and solution of burrs on the edge of laser cutting metal.Why does the burrs appear when laser machine cutting m...

Laser cutting machine cuts stainless steel

Stainless steel laser cutting machine is higher in cost than wire cutting, and the precision is not as good as wire cutti...

Focus point affects the cutting accuracy of fiber laser cutting machine

The influencing factor of the cutting quality of fiber laser cutting machine——focus position adjustment, because the ...

The top seven metal materials most suitable for laser cutting

Carbon steel Because carbon steel contains carbon, it does not reflect light strongly, and the absorption beam is very go...